1. ETSI TS 102 427 V1.1.1 (2005-07)
Technical Specification
Digital Audio Broadcasting (DAB);
Data Broadcasting - MPEG-2 TS streaming
European Broadcasting Union Union Européenne de Radio-Télévision
EBU·UER

2. 2 ETSI TS 102 427 V1.1.1 (2005-07)
Reference
DTS/JTC-DAB-40
Keywords
audio, broadcasting, DAB, digital, MPEG
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2005.
© European Broadcasting Union 2005.
All rights reserved.
TM TM TM
DECT , PLUGTESTS and UMTS are Trade Marks of ETSI registered for the benefit of its Members.
TM
TIPHON and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI

3. 3 ETSI TS 102 427 V1.1.1 (2005-07)
Contents
Intellectual Property Rights ................................................................................................................................4
Foreword.............................................................................................................................................................4
1 Scope ........................................................................................................................................................5
2 References ................................................................................................................................................5
3 Definitions and abbreviations...................................................................................................................5
3.1 Definitions..........................................................................................................................................................5
3.2 Abbreviations .....................................................................................................................................................5
4 Introduction ..............................................................................................................................................6
5 Error Protection for DAB MSC stream data sub-channels and transport packets of 188 bytes ...............6
5.1 General considerations .......................................................................................................................................6
5.2 Outer Coding ......................................................................................................................................................6
5.3 Outer Interleaver.................................................................................................................................................7
5.4 Transmission ......................................................................................................................................................8
History ................................................................................................................................................................9
ETSI

4. 4 ETSI TS 102 427 V1.1.1 (2005-07)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Technical Specification (TS) has been produced by Joint Technical Committee (JTC) Broadcast of the European
Broadcasting Union (EBU), Comité Européen de Normalisation ELECtrotechnique (CENELEC) and the European
Telecommunications Standards Institute (ETSI).
NOTE 1: The EBU/ETSI JTC Broadcast was established in 1990 to co-ordinate the drafting of standards in the
specific field of broadcasting and related fields. Since 1995 the JTC Broadcast became a tripartite body
by including in the Memorandum of Understanding also CENELEC, which is responsible for the
standardization of radio and television receivers. The EBU is a professional association of broadcasting
organizations whose work includes the co-ordination of its members' activities in the technical, legal,
program-making and program-exchange domains. The EBU has active members in about 60 countries in
the European broadcasting area; its headquarters is in Geneva.
European Broadcasting Union
CH-1218 GRAND SACONNEX (Geneva)
Switzerland
Tel: +41 22 717 21 11
Fax: +41 22 717 24 81
The Eureka Project 147 was established in 1987, with funding from the European Commission, to develop a system for
the broadcasting of audio and data to fixed, portable or mobile receivers. Their work resulted in the publication of
European Standard, EN 300 401 [1], for DAB (see note) which now has worldwide acceptance. The members of the
Eureka Project 147 are drawn from broadcasting organizations and telecommunication providers together with
companies from the professional and consumer electronics industry.
NOTE 2: DAB is a registered trademark owned by one of the Eureka Project 147 partners.
ETSI

5. 5 ETSI TS 102 427 V1.1.1 (2005-07)
1 Scope
The present document specifies how MPEG-2 Transport Stream can be encapsulated within a DAB MSC stream data
sub-channel including additional error protection. The error protection mechanism is composed of a Reed-Solomon
coder and an interleaver.
2 References
The following documents contain provisions, which, through reference in this text, constitute provisions of the present
document.
• References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
[1] ETSI EN 300 401: "Radio Broadcasting Systems; Digital Audio Broadcasting (DAB) to mobile,
portable and fixed receivers".
[2] ETSI EN 300 744: "Digital Video Broadcasting (DVB); Framing structure, channel coding and
modulation for digital terrestrial television".
[3] ISO/IEC 13818 (Parts 1 to 3): "Information technology - Generic coding of moving pictures and
associated audio information".
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the following definition applies:
Transport stream (TS) multiplexer: device that combines multiple elementary streams into a Transport Stream (TS)
for delivery through a single transmission path (see ISO/IEC 13818 [3])
3.2 Abbreviations
For the purposes of the present document, the following abbreviation applies:
DAB Digital Audio Broadcasting
ETSI

6. 6 ETSI TS 102 427 V1.1.1 (2005-07)
4 Introduction
The DAB system EN 300 401 [1] defines the way that audio (programme) and data services may be carried. However,
in MSC stream mode, the error protection scheme is optimised for audio services. Data services carried in stream mode
(for example video services) require additional error protection and this can be achieved by applying an outer coding to
the data packets before insertion into a DAB MSC stream mode sub-channel. In order to provide as much commonality
in transmission and reception equipment as possible, the outer coding is taken directly from DVB-T EN 300 744 [2],
which also needs to provide appropriate error protection.
The system is defined as a functional block that performs the addition of outer coding (Reed-Solomon code) and outer
interleaving (convolutional interleaving). This functional block sits between the output of the MPEG-2 transport
multiplexer and the input to a stream sub-channel of a DAB multiplexer, see figure 1.
MPEG-2
transport Reed-Solomon Outer DAB main service
multiplexer outer coder Interleaver channel multiplexer
Scope of present document
Figure 1: Conceptual diagram of the outer coder and interleaver
The process is identical to that specified in EN 300 744 [2] clause 4.3.2.
NOTE: No energy dispersal scrambling is performed because this is provided by the DAB system; therefore no
inverted SYNC bytes are required.
5 Error Protection for DAB MSC stream data
sub-channels and transport packets of 188 bytes
5.1 General considerations
Each input transport packet is 188 bytes long and starts with a synchronizing byte of value 0x47. The transport packet
may contain any data. See ISO/IEC 13818 [3] for more details of the format of transport packets.
5.2 Outer Coding
The outer coding and interleaving shall be performed on the input transport packet (see figure 2).
Sync byte
MPEG-2 transport stream data (187 bytes)
0x47
Figure 2: Input transport packet
ETSI

7. 7 ETSI TS 102 427 V1.1.1 (2005-07)
Reed-Solomon RS (204,188, t = 8) shortened code (see note), derived from the original systematic RS (255,239, t = 8)
code, shall be applied to each transport packet (188 bytes) to generate an error protected packet (see figure 3).
Reed-Solomon coding shall also be applied to the packet synchronizing byte (i.e. 0x47).
NOTE: The Reed-Solomon code has length 204 bytes, dimension 188 bytes and allows the correction of up to
8 random erroneous bytes in a received word of 204 bytes.
Code Generator Polynomial: g(x) = (x+λ0)(x+λ1)(x+λ2)...(x+λ15), where λ = 2.
Field Generator Polynomial: p(x) = x8 + x4 + x3 + x2 + 1.
The shortened Reed-Solomon code may be implemented by adding 51 bytes, all set to zero, before the information
bytes at the input of an RS (255,239, t = 8) encoder. After the RS coding procedure these null bytes shall be discarded,
leading to a RS code word of N = 204 bytes.
204 bytes
Sync byte
MPEG-2 transport stream data (187 bytes) parity word (16 bytes)
0x47
Figure 3: Error protected packet
5.3 Outer Interleaver
The convolutional byte-wise interleaver shall be based on the Forney approach with the interleaving depth I = 12 bytes
as shown in figure 4.
Figure 4: Conceptual diagram of the outer interleaver and deinterleaver
Following the conceptual scheme of figure 4, convolutional byte-wise interleaving with depth I = 12 shall be applied to
the error protected packets. This results in the interleaved data structure (see figure 5).
The convolutional interleaving process shall be based on the Forney approach, which is compatible with the Ramsey
type III approach, with I = 12.
The interleaver may be composed of I = 12 branches, cyclically connected to the input byte-stream by the input switch.
Each branch j shall be a First-In, First-Out (FIFO) shift register, with depth j ⋅ M cells where M = 17 = N/I, N = 204.
The cells of the FIFO shall contain 1 byte and the input and output switches shall be synchronized.
ETSI

8. 8 ETSI TS 102 427 V1.1.1 (2005-07)
For synchronization purposes, the SYNC bytes shall always be routed in the branch "0" of the interleaver
(corresponding to a null delay).
NOTE: The deinterleaver is similar in principle to the interleaver, but the branch indices are reversed (i.e. j = 0
corresponds to the largest delay). The deinterleaver synchronization can be carried out by routing the first
recognized sync byte in the "0".
204 bytes
Sync byte
RS encoded, interleaved data (203 bytes)
0x47
Figure 5: Interleaved packet
5.4 Transmission
The interleaved packets are inserted into the MSC stream mode data sub-channel. The use of the outer coding and
interleaving scheme is specified by the user application. No additional signalling is required.
ETSI

9. 9 ETSI TS 102 427 V1.1.1 (2005-07)
History
Document history
V1.1.1 July 2005 Publication
ETSI